This is the M4 Sherman; thermo-printed U.S.Army
with the allied star down one side and marked Sherman M4 on the
rear-plate it is definitely in need of a turret redesign, but for what it is, a
dime-store toy of the 1950's it's fantastic! And, apart from the turret is not
a bad rendition of a post D-day Sherman with the distinctive patches of
appliqué armour on the hull-sides.
I've been after a Gilmark example for ages; you may remember we looked at a 'maybe' Tudor Rose (or Kleeware)
version back at the Blog's beginnings, so I'd always wanted to place them
side-by-side, as I knew the Gilmark
one had black-plastic running-gear . . .
. .
. while the 'British' one had body-matching plastic. However, the surprise -
and what makes this present from Ed all the more gratifying - is that the
track-units is where the differences start, not where they finish?
The 'copy' and the Gilmark differ in lots of subtle ways, the glacis-plate is at a
different angle, giving the copy longer nacelles coming forward of the driver
and observer hatches, the Gilmark has
wider mud/track-guards, Copy has better carpet-wheels, redesigned to be less
wobbly and therefore less likely to break-off . . .
. . . while more obvious differences also
exist; the Gilmark has an stub-aerial
on the rear-deck making full-traverse of the turret impossible, copy has no
title block across the rear-plate . . . there's more (track teeth, headlights,
taillights, smooth interior), you'll notice others in the photographs.
However . . . having compared all sorts of
copies, homagé and obviously pantographed
piracies over the years, I'm going to stick my neck on the line here and state
I still think they are related, part of the 1950/60's mould-swapping than I
mentioned again the other day and that Gilmark
were aware of/involved in/with both versions.
The reasons for my thoughts on the matter
are thus; that if a UK company was to copy (illegally) such an iconic vehicle
(they were still in service all over the world at the time) the first thing they
would do is improve the turret? Instead of which they have improved (obvious?) faults
with the Gilmark original -
hidden-wheels and aerial, while keeping the overall 'lines' of the toy intact?
I suspect that when the UK firm wanted the Sherman
M4 removed from the mould it was found to be technically difficult as
the 'S' and '4' are too close to the edges of the angled corners of the engine
deck to get a decent grinding-tool in there without doing damage, so they were
either given permission to produce a duplicate-mould tool . . . or sent one?
And that therefore, the differences were
produced 'in-house' - as it were - the major ones being deliberate
improvements, the minor-ones as vagaries in the final engraving/tool-finishing?
If you don't study them both side-by-side (to an obsessively nerdy level!),
they are intrinsically the same model.
Ed also sent me the armoured car and it's
lovely! It's a bit fictional, the hull is quite Staghound-like, but the turret with its twin cannons is way out
there. But for 'dime-store', 'old-school' war gaming, having two or three of
these race up the MSR to retake the pontoon bridge before the other guy can get
his lumbering Tiger's through the
French village . . . quality toy!
And - let's be honest - it's more realistic
(as an AA-Staghound!) than its
nearest rival; the Tudor Rose
Armoured car which is a Humber/Daimler/Rolls Royce hybrid with an egg-box turret!
Thanks Ed, a lovely present and the Tiny Trojans get to come out again! By
the time the Blog's 25-years-old, they will have followed all the vintage,
ready-made, small-scale AFV's into battle at least once, along with the odd
space tank!
Ed's covered the photography much better
than I can, here;
Sherman M4
You did an excellent job on comparison's Hugh - I would have probably missed many of the chnages or differences in the two tanks.! Well done!
ReplyDeleteCheers Ed, but I couldn't have done it without input! And we're talking hardware here, not data!
ReplyDeleteI love them, thanks Ed
H