K is for Khaki Kattle-truck!

There is a tendency, particularly among cheaper toy makers, for military versions of civilian vehicles to be produced, by the simple expedient of manufacturing the civilian toy in military-coloured plastic, this third Jimson post covers one of those! And I should point out, yesterday's Land Rover was based on the Daktari one, not a clown/circus one!

 

These came with the Land Rover and futuristic Transporter/Tank combo', and while I don't think the figures have anything to do with the vehicles, I shot them with this one, just in case! They are high-grade piracies of the Matchbox American Infantry from 1974/75'ish.

 

Compared with the transporter's tractor-unit, the body is longer, and the stake-sided superstructure is held in place with the same clip used on the transporters. It would seem these late-cab toys are harder to find, so must have been made right at the end of Jimson's reign?

 

The mounting hole equates to the other position on the tractor-cab, which is the further-back one, not found on the first version, so clearly there was an attempt to mount some other bodies on the tractor, before the newer stretched-chassis was designed, as seen on the cattle-truck? The newer chassis, like the transporter cab-units, has no mark/number.

 

Badly damaged, but I was buying the lot for the Tank Transporter and Land Rover really, and, as I say, I don't think the figures belong with the set, but they might?!

J is for Jimson - 116 & 127 Tank Transporter and 128 'Bulldog' Tank

Except the numbering is not that clear! This is one of those posts, that's been in the queue for ages, but I couldn't decide what to do with all the images, or remember what I'd wanted to say about them, so I just lost interest after the first collage was done, about four years ago!

But I looked them up the other day looking for something else (which turned out to Hover-Hoover!), and I got minded to polish it off, and get it out of Picasa! And in fact it's a tale of two transporters and two tanks!

Jimson 127 Tank Transporter with Action Bulldog Tank. "Fully Metallised" refers only to the wheel-hubs with this toy, but other toys had more chrome-effect detailing, and presumably the message was just put on all boxes! I think this is the same box-art as you get with the Fairylite issues, where Fairylite is just over-printed, but I suspect the Jimson box was different for the second version, but I don't have an example?

 

As they left the box, you will recognise the tank from a previous post on it and it's similarity to the Airfix '1st version' Patton Tank, now believed to be originally a T. Cohn design, the older one is above, and a reasonable rendition of a post-war US 'big rig' truck, the later version is very 'spacey', but uses an almost identical tank.

We'll return to the tanks in a minute, but here they are stripped down, and both have an unexplained, and unexplainable hole in the main bed/plane of the trailer, if I had to guess, I'd say the hole might be to stop warping, as the hot moulding is released from the tool?

The newer version (the trailers carry the 116 and 127 numbering, the cabs are both unnumbered) has two holes for the locating pin and clip of the trailers, and I'm guessing this will be due to a slightly different stud on one of the civilian trailers, I think there were fuel-tanker, and car-transporter bodies available, and maybe a plain flatbed for loads?

How the clip locks the pin/stud into place - older version.

As well as a whacky tractor-unit, the 127 version has whacky wheels, still 'metallised', but far less realistic than those on the earlier version, in this they were mirroring moves in the die-cast market, where realism gave way to silliness, in a need to keep kids interested, or entertained!

Piggy-back! The whole-width ramp of the later model, was separate ramps on the earlier, which loosely sat in channels, using words like 'clipped' or 'locked' wouldn't do justice to the lightly sitting-there, they were actually managing! I think they are meant to be wedged under the two suds behind the cab, but are already quite a loose fit, and with nowhere safe to store them, if you can't find a boxed one, you might not get ramps!

But, while they both carry the 128 code, the tanks are very different, while looking almost the same! The mudguards have been extended on 'II', the cupola MG lost, the main-gun shortened and the flash-eliminator fattened, while the turret itself is set back a bit, and, on my example . . .

. . . there's no push and go motor on 'I', it has the mounting-holes for one, so again, guesstimation suggests the motor was fitted to single-boxed tanks, but not to the transporter ones, because the tractor-cab has its own? But in the end it was easier to have one assembly-line, so the later tanks all have a motor?

The track-guards, extended on II, still short on I, which is how we find them as Airfix, Brumberger and/or T. Cohn, in the smaller scale, in which guise we looked at this last;

https://smallscaleworld.blogspot.com/2010/05/p-is-for-patton-pershing-by-airfix-and.html

 

II (left) v. I (right)

 

Image dump;

Type I at a slightly different angle!

 

Even the same-numbered baseplates are not exactly the same.

 

Recent eBay sale, which is a II with motor, it was sold with the 'space-truck' transporter. As per previous viewings, the turrets are soft polyethylene, colour-matched to the hard polystyrene bodies and baseplates, and scale is around 1:48th.

A couple of scans I took at a later date, I think the tank is the key to the odd numbering of these sets, originally awarded 128 as a stand-alone, boxed, and probably motorised version (1960's), when the tractor-unit (unnumbered, and possibly already in use with other-number carrying tanker or car trailers) was married to the flat-deck trailer and tank, the box got the 127 number, because it was spare, and/or closer to the tank's 128, than the trailer's 116?

Then, when the combination was redesigned (1970's), the new trailer was numbered to match the earlier box, because . . . well, it's only conjecture, but the truth won't be too different? Although, as the whole thing would have required new box-art, it could have all been given a new number?

116 - 1st version trailer

127 - 2nd version trailer

127 - 1st version box

128 - Bulldog Tanks, both versions

Both tractors unnumbered

T is for Two - Four-Wheeled Wonders!

Between civil, military and space, there were lots of vehicles in the last lot of Sandown show plunder, but that's not such a surprise, given as how it started life as a train/die-cast show, those tables groaning under the weight of Furby 'plushies', Bratz dolls, Lego and Transformer stuff you see these days, are far more recent additions to the halls!

 

In its day, this must have been a common-enough pocket-money toy, as it's at least the third to be added to the stash I think, and while this isn't the best one, it comes with the driver, which previous examples were lacking, but which I probably have in the loose passenger/rider zone, so will hopefully now be able to properly crew the others with! It's a pretty-standard Poplar/Thomas PVC figure, but in white rubber, rather than the usual flesh/pink/brown tones; possibly to match the wheels he was shot with?

 

While this, Jean Höfler or Manurba (?) toy is another Mercer, and it could be the Mercer all the other plastic Mercers are copied from, but I don't think so, it's not even the best moulding out of all those US, French and Hong Kong ones we saw here at Small scale World, a while ago, so I suspect it's a copy too, from whichever was the better Mercer, one of the French ones, Schuco, Matchbox 'Yesteryears'?

 

I don't recognise the boy-logo, and Jean used a drum-logo, but the text is very much in the style of either maker. I've found the rest of the set on a locked foreign-language site, associated with the name Rosenberg, and have possibly ruled-out early Siku and Bruder?

P is for Police Department

Just a quickie tonight, it's a Hasbro dime store type, which is unusual in itself, but more so for having a folding roof, with no apparent purpose, by which I mean the internal compartment won't accept figures, there are no holes for torsos, and it may have had a small bag of candies, but it would have been very small?

What do you make of it? I took too many shots of the underside, and not enough of the top, but it's in storage now, I think? The hinged roof only invites damage? Marked POLICE DEPT., lengthways on the bonnet (hood), readable one way only, and HASBRO 1 MADE IN USA on the underside, it's a lovely shade of ultramarine!

B is for Before & After - Cleaning!

Quick one from the photo-archive, the Auburn Rubber half-track, before and after cleaning, the lighting also changed slightly, but I think the job still shows itself to have been a good-un!

Not terribly realistic/true-to-life, but better than Marx's efforts, and around 1:48th scale? Manufactured from a synthetic PVC-rubber, rather than the earlier vulcanised tapped-rubber, of which Auburn had done a few military vehicles, but not a half-track, I think Sun Rubber did a very crude vulcanised half-track?

 

I put a little touch of WD40 on the axles too (hidden carpet-wheels behind the track-units), just to stop them getting any worse, after I'd given them a wet-polish with a bit of wire-wool, while it was in the sink for its once-in-a-blue-moon valet!

Hugh's Handy Helpful Home Hobby Hints - Curtainsider!

H6-5! Best said in a West Country accent; Curr'un Cider! We're returning to the previous post with a simple fix for that rather leery truck we saw.

As it comes from PMS, stickered-up to within an inch of its life, and hardly the low-visibility or 'subdued' scheme you'd want on a military vehicle; with the sun on it, I fancy you could spot it from the International Space Station!

But they are all simple paper stickers and were mostly destined for the bin!

The removal revealed weirdness, moulded into one side as full cavities in a stencil style, the letters ABCOK, which is then fully mirror-reversed on the other side so you can see right through them both like the two ends of a tunnel?

Now does this mean ABC  OK, which might mean the vintage ABC is still extant as part of the modern Chinese toy industry (very unlikely)? Or is it poorly selected random letters because someone detailed someone else to select and cut some letters into the tools for some inexplicable reason? Or is it a more insidious hidden-behind-a-sticker thing, like the abbreviation for 'American Bastard Customer' or 'All Brit's Cocks'?

I doubt we'll ever know, if it was an Early Learning thing on un-stickered civilian versions of the toy it would be ABCDE or ABCXYZ or something wouldn't it? I suspect sample text on the CAD drawing which was accidentally transferred to the CAM tooling and reversed 100% for the other cavity! But there you are - spurious letters cut into the sides of the truck for no [apparent] reason!

I then cut new plain paper stickers from heavy parcel labels and coloured them in with a Sharpie! Simple, but effective, although the sides needed about four coats of Sharpie to lose all the pen-lines and hide the letters underneath. I used an old agate nail-buffer to smooth the sticker down especially round the edges and the four corners

Neatly converts a leery truck into a logistics curtainsider, although pretty fictional and we have to ignore the wheels for now! It's a sort of 5½-7½-ton rigid-bodied puddle-jumper (with a 'big-rig' cab!), around 1:48th/40mm compatible. And as you can see I left the 'sensible' stickers front and back for a bit of interest! And thanks again to Peter Evans of PW for the PMS Truck.

ABC is for Another Beauty Catalogued!

I received some lovely 'might be/probably' ABC figures from Chris Smith a few days/weeks ago, which are in a future 'H is for How . . . ' post (and which I have posted elsewhere recently for those who saw them), but I've also managed to track this down;

It's starting to lose its bonnet-graphics and is missing a spare-wheel (which may turn-up in the spares box), but is otherwise in good nick for something which probably dates from the late 1950's or very early 1960's. The next question is whether it goes with the green figures we've seen here before, or one of the various iterations of Monogram copy - we've also seen, and I suspect the later, so will be looking at them more closely when they come out of storage, but for now - new Jeep!

P is for Payton, Winneco, Palmer, HG Toys . . .

. . . and now could be Victory Buy for/or by BMC? And there's bound to be a Hong Kong version somewhere!

Another post which grew organically over time, starting with Brian Berke's purchase of a re-issue in a local hobby store in N. East USA, prompting me to locate a couple, in the course of which the riders were identified (they've been in the unknown's for years!) and Hong Kong squeezed in at the end!

2.99 seems like a steal to me, Toy Soldiers Depot have some at 1.99 plus postage, so about the same in the end, if you grab a few. Now manufactured in neutral grey plastic so paint will be everything!

I don't know for certain if the originator is Victory Buy, and the packaging is generic/near-blank but they seem to have a lot of this old stuff now? It never stared in BMC publicity as far as I know (they have been carrying the Payton twin-flak 'space tank'). . . and can anyone hazard a guess as to what CHD might mean or signify - Cargo Handling Detachment? Could just as easily be coming-up from Mexico?

So I managed to track down what I guess is an earlier one (olive green, stickers) and a later one (cabbage green, no stickers), and I should point out - as we go through the post - my olive one has the slightly smaller, wider-axle'd wheels of the gun/jeep as it's front pair, not that noticeable, but it needs to be sorted at some point!

You can see from the series of mould-damage 'glitches' on the right-hand door's interior surface that all three trucks have come from the same tool.

I hadn't noticed to begin with how filthy the cabbage-green one was, I think it's been knocking-about in a box/tin/tub with lead (hollow-cast/pod-foot) or whitemetal (war gaming) figures for a couple of decades or so . . . but it might have been a pencil case, whatever the cause, static had given it a good coating of some graphite-like substance!

A scaler from Brian with one of Crescent's finest, it's really carpet-wars scale! The flash round the rear corners and on the foot-step/running board has got worse over the years as the mould ages, but it easily removed with a sharp blade.

More shots and the bedspread one shows them after I gave them the TFR treatment, almost factory-fresh!

We looked at the figures briefly ages ago in an ostensibly Marx post, but I didn't - at the time - clock the seated figures that went with them (or I might have, and not mentioned it/soon forgot it, as they were in storage at the time!), they are dead common in mixed lots, junk lots and rummage trays at shows and on the internet, so the sets must have been almost as common as the Tim Mee 'Vietnam' GI's sets were, over the years.

Brian actually sent some of them (the other figures) too, a couple of years ago, we saw them here briefly (in a bag!) and when everything's sorted we'll have a proper look at it all again.

Hong Kong took the seated chap, added a loop to his helmet and dropped him out of a perfectly serviceable aeroplane on the end of a bed-sheet! MS could be Ming Shing, a known novelty issuer from Chai Wan, Hong Kong, but there's nothing concrete.

I'm pretty sure there's an Italian branded import version of this somewhere, but I can't find it or the images, so that's a big question-mark against a possible false-memory!

Thanks to Mr Berke again for the shots (all the grey ones) which got me tracking down the others and pulling it all together a bit; Payton subsequently owned by Winneco and Palmer, issued by HG Toys in a 'rack toy' style boxed play-set and now . . . by . . . someone? And the grey one's not a 'recast'; you cast metal, it's a re-issue of moulded product from the original tool.