S is for Seen Elsewhere - Sci-Fi Library (2) Kits, Movie Franchises and Movies

The other half of the Sci-Fi stuff I scanned a while back for elsewhere, and it's less about toys and more about research/information and some kit bits, I'll start with!

 

Mentioned when I showed the recent purchase of a late edit of his general list, this is Burn's Sci-Fi and Figures list, which as well as covering figures, also includes the odd dinosaur, monster, insect and bird kits etc . . . you see, off the back of little pamphlets like the original M.A.P./Military Modelling guide, Burn's and his co-respondents, did ALL the work, which sites like Scalemates took to the next level with their interactive member-pages and issue/brand timelines.

 

So when people bang on about a few dinosaurs and pretentiously add "Researched by . . . ", while adding a bunch of feeBay/Worthpoint images, understand it's just plagiarism! Pretending to do the work, actually done by other people thirty or forty years ago, while failing to credit them, is about as low as you can go . . . for a few clicks?

 

This is a Fine Scale Modeller 'special publication', which is really just a feast of exhibition-quality models, posed against realistic backgrounds or dioramas, and as such, is really another coffee-table book, but a rather nice one!

 

While this is a more general look at the smaller of the two 'big' enduring franchises, I've not got much invested in Star Trek, as there haven't been that many smaller-scale or solid figures in the pile of memorabilia issued over the years, but Playmates gave us small 'Action Fleet' types, there was that set I bought from Colin Penn at a Plastic Warrior show a few years ago, and the current (not in this book)  EMCE sets are still out there, so some stuff can be found in 'our' area of interest!

 

Then there's the other franchise . . .

 

This, minimally illustrated, is an encyclopaedic listing of everything known to hardcore-fans, from the release of the original movie, until the release of the final film in the second trilogy back in the 2005. After which, I think, due to first, the tsunami of new stuff and second, the coming of the Internet, updates became superfluous.

 

But Rebel Scum, the Internet fan-base, helped compile it, and it's THE list of pillow-cases, soaps, wallpapers, novelty lamps, and yes, toys and kits, from the early years of the Star Wars phenomena, though to, say, 2005 - nearly 30-years-worth of marketable tat, alphabetically listed, by manufacturer!

 

This only gets as far as the 1st/forth movie, and may be by the same Beckett? It's a tie-in with a then major Star Wars retailer, Beckett Hot Toys, and is arguably better illustrated than the previous, but more dated now by having the 1999 cut-off, in listed data.

These are really 'bestiaries' of one type or another, similar to the much more expensive, glossy, hard-backed, coffee-table 'technical manuals' which ran around the same time, but relying on mostly black-and-white line drawings. I use them to just find-out the names of things. Mostly from the first three 'classic' movies

 

While this is not one of the just-mentioned vintage technical manuals, but rather a more modern publication, best described as one section of the various Rebel Scum wiki's, in book form, and while it may be of use to you, I only bought it as a shelf-filler, because it was cheap, and can't remember it giving me anything useful, but that's in the context of me being the 'general reader' here, not a full Star Wars nerd!

 

While among the minor franchises, this is a useful tome, but then for collectors, Schiffier have never (? I stand to be corrected) produced a duff one, and I have maybe a dozen of their titles now? Like the Star Wars' ones above, this has non-toy stuff, and you find yourself remembering all sorts, as you flick through it!

 

While this pair are both bestiaries; the former using TV- and publicity-stills, the latter, more line-drawings, but helping to quickly identify two other franchise 'universes' I don't follow closely. There are several similar titles in the Tolkien 'zone', but that's never been with the toy books and wasn't shot with the rest, leave alone scanned with these! Add the Dungeons & Dragons guides, we saw while looking at the 'Gygax' stuff a while ago, and you've most of the monsters you could ever need!

 

While these two, are such useful research-tools I keep them with the collectables library, rather than the Sci-Fi/Fantasy library (where the Tolkien stuff is!), and do dip in them from time to time, especially when I can't remember the name of a movie or character which is on the tip of my tongue/in my peripheral thoughts!

There are lots of books like these, and I have more general ones, another on Westerns, and a very useful old film-library catalogue, from when clubs and societies could order films, in their 'cans', so show at schools, village halls or such-like.

 

We had a film-club at school, which anyone could attend, and I remember specifically seeing what were considered 'X' films, at the time, like Straw Dogs, the seminal Eastward movie The Beguiled, as well as fun stuff like Bugsy Malone and I think we had Once Upon a Time In the West? I think we had some Bond films too, I can't remember all of them, but we had two or three films per term, in the main hall, on a full-screen, this would have been 1977 - '80.

3D is for Other Blogs, Really!

Or why I stopped worrying and learned to love tolerate the polymer printer!

 

Donation!

Many Thanks to Tom Clague

('Tomholio' around the Internet) 

 

Many years ago, although it seems like yesterday, I just don't know where it goes? And, it goes there quicker every year, but many years ago, 2007/2008, on the HäT forum, which was a very different beast then, it has since been heavily bot-edited by 'H' for perfectly understandable reasons, no criticism, and moved home/platform a couple of times, and is now a more corporate or pro-brand site, but many years ago we used to have a lot of fun on there, sometimes it would degenerate into silliness, other times the less humorous' would take offence, often about something which wasn't actually aimed at them, but there you go, all humour requires a certain level of grey-cells, some more than others, but many years ago, the Brit's, Antipodeans and some of the Canucks/Yanks would have some real fun . . . but we also had some more serious discussions, and many years ago, we had a thread on 3D Printing!

 

Straight out of the printer. 

 

At that time, the first commercial machines were just becoming something a semi-affluent Western hobbyist, within the 10%, globally, could look at affording, and a lot of potential was held by the nascent technology, or series of technologies, as there are various methods employed in Deposition-Modelling, or Rapid Prototyping (which includes CAD/CAM and CNC)*, as 3D printing is known to those at the cutting-edge of the Industry.

 

*Computer-aided design, computer-aided manufacture, computer numerical control['ed machining].

 

When cats'll fly!

I was quite hopeful at the time, but also pointed out that it might end the toy soldier industry as we then knew it, however, and thankfully, time has shown I was wrong on that one, and despite many friends, acquaintances and fellow-Blogger's having 3D machines of their own, or using the bespoke print-on-demand sellers around the place, most of the then new names in the hobby are still going, including HäT Indusrie!

 

This one's got no name!

 

The other criticism I had, or shared with others in that conversation (long since deleted by the forum-police 'bots), was that it would cheapen the concept of figure collecting, by making anything and everything available to anybody (who could afford it) in any scale, at any time, and that has come true!

 

Is there a doctor in the house?

 

Anyone, with the necessary skills, software, or scanner, or a useful mate so equipped, can scan any figure ever made, or design any figure you can dream of, in your wildest imagination, manipulate the file in an infinite number of ways, and print the results in increments of any scale from a couple of millimetres to whatever size you floor, drive or yard can sustain, without damage!

 

Airfix knock-off, and with naked girlfriend!

 

And that printing can be via simple filament feed, liquid or powder sintering, or deposition of layers, or that was the situation when we were having that conversation, with the new, affordable 'home PC' machines mostly being the filament type, now known as Fused Deposition Modelling (FDM), it's probably still the commonest form of home printing. And is also the technology in the rather very disappointing pen I looked at, here.

He used to drive the Millennium Falcon, you know?

But not in these threads!

HO/OO (left), 25mm (right)

 

Increasingly sintering is becoming affordable for the home printing enthusiast, and you can 'sinter' powder or liquid polymer, and metal (now called fusion), they alll have their own jargon! Vat Polymerisation (VP, for liquids) or Powder Bed Fusion (PBF, for powders!), with VP broken down into Stereolithography (SLA, usually using lasers) and Digital Light Processing (DLP), with fusion further divided into

 

Selective Laser Sintering (SLS - for plastics), and Selective Laser Melting (SLM) or Electron Beam Melting (EBM) for metals, these can be called Directed Energy Deposition too, althogh technically that's a sub-type with at least six systems!

 

HO/OO Turkey - incredible levels of detail.

 

Other systems are Material Jetting (deposited droplets of photo-polymer material, are then cured by UV light, we looked at a simple version of it, here), Binder Jetting (A print head deposits a liquid binding agent onto a bed of powder material, layer-by-layer, to hold the powder together, developed many years ago by the movie industry for scenic backgrounds, I believe?), and Sheet Lamination, where, thin sheets of material are bonded together and cut to form layers/shapes.

 

 ♪♪♫ She wants to break free!

She wants to break free from your lies
You're so self-satisfied
She don't neehee'eed you

She's got to break freehee'ee!

God knows!

God knows She wants to break free! ♫♪♫

 

And all the above, is only simplified, for modellers and wargamers! There are more than ten forms of Vat Polymerisation, eight types of Powder Bed Fusion . . . µSLA anyone?That's Microscopic Stereolithography, to you, Sir!

 

Anatomically correct nudes above,

Brazilian Turkish surgeon's 'skills' on display below!

 

And if you can afford a metal fusion printer, you can make yourself an indestructible copy of the Hong Kong/Laramie jungle superhero The Phantom, in a material designed to withstand the strains of motor-racing engines, aerospace components, or satellite thrusters! While meat (pork, beef and fish), replacement skin (also meat!) and concrete are all being successfully 3D printed.

 

The names are Bond, Roger and Shaun!

 

But, another criticism, at the hobby end, a lot of the stuff is manufactured from low-grade polymers, deliberately biodegradable polymers, or polymers with unknown long-term properties! And, a secondary aim of this post, is to explain why I don't really post 3D printing, won't often, and chose not too, back at the start of the blog, really.

 

Aping around, monkeying about!!

 

It's not snobbery or superciliousness, but that the infinite parameters, of scale, pose and subject, along with the possibility that your downloaded figure, posted from South Korea might disintegrate in six months, along with my lack of knowledge of the subject despite following it pretty closely, and - while I was doing 3D CAD - with some interest, just means I'd rather concentrate on existing vintage, and modern new production.

 

"Sonta-haa! Sonta-haa!"

There are two people who do post a fair bit now, Shaun, over at Fantasy Toy Soldiers, has posted some exquisite figurines in the larger scales, which would be a joy to paint, and Russ over at Plastic Toy Soldiers has started posting the odd 'Combat' 3D prints. It's not that I won't post 3D printed figures, I will, from time to time, I have one or two, I think, but I'm not going to collect them, there aren't enough hours left in the universe to get them all!

 

♫♫♪ "We're only passenger, we wanna' get off" ♫♪♪♫

 

And, just in case you didn't get my attempts at humorous captions, here's what Tom said about this lovely little parcel from Down Under, with grateful thanks to him for this donation, and thanks to Adrian for receiving the parcel, while I'm stuck in Limbo! Tom posts some of his 3D prints on his blog;

 

https://tomertonvillage.blogspot.com/

". . . a bit of background: Often the 3D printers i've bought from will include a number of duplicates - ostensibly just to make use of the resin pool they load the printer with . . . in this bag, we have an assortment designed and printed from various places around the world.

Sontarans Designer Wayne Peters has a number of excellent free Doctor Who files on cults3d.com. I downloaded these boys, and had an Australian printer make me a 1/76 set - she kindly included these larger prints. 

 

Movie stars in pink Ebay is awash with sellers from China who have a cornucopia of 1/64 scale figures - to go with Hot Wheels type cars. Along I came, and asked if they could print in 1/76 scale. This caused enormous confusion, and led to them sending figures of all shapes and sizes.

 

Doctor Who piracies Warning: the Tom Baker and Sylvester McCoy in your possession are wanted men, on the run from the law! These are indeed piracies of larger scale game pieces. I won't incriminate my source - instead, I'll quickly distract you with... 

 

Curvy ladies from Turkey, surprise surprise, what do middle-aged men want? Curvy ladies! Designer Phnix3d from Turkey obliges, with thousands of sculpts. His novelty is that he provides both a dressed and nude version of each pose. Model rail companies have done nudies before [I know, I have several of the 'naughty' Noch sets! Ed.] , but never to this quality (or ballooning imagination). The flipside is, he does a handful of male figures, who, dwarfed by their lady friends, frankly look a bit lost and embarrassed. The prints themselves have come all the way from the USA, where printer 'DoubleG Diecast' has these, and hundreds of other figures listed.

 

Planet of the apes, 2001; DoubleG also has these movie characters. As with the pink Chinese prints, I suspect the designs are scale downs from larger multi-part designs (copyright & intellectual property are not well respected concepts in the 3D printing world).

 

'Man who wants to break free', from Vietnam My model village could do with a good hoovering,Ii'll be setting Freddie loose once I've painted him.

 

. . . I've found it fascinating to keep an eye on 3d printing, asit'ss evolved from fairly naff filament types to incredible high-resolution resin machines now. Absent from this bag, I shared you the link to Smart Models UK previously; his are perhaps my favourite 3d printed model rail range, which he sells in neat little sets (alas with no duplicates), recommend . . .

 

. . . One to check out - I like both the style and the subject matter of his various figure sets: https://www.smartmodels.org/" 

 

2001 - The future was many years ago!

 

As a post scriptum, and given what I said about plastics, these came halfway-round the world in a jiffy bag, are all less than 30mm, and the only damage was a couple of bits of Sontaran, which will need glueing, along with Doctor the 7th's umbrella, Freddie's hoover and the wings of the flying Cat'sect. But Clint's cheroot and Connery's gun, survived whatever the international post can throw at a small parcel!

T is for Two - Donations

On two recent meetings Adrian Little of Mercator Trading has given me small tubs of odds and sods, some of which are quite rare, unusual or interesting, and having found the errant pig hiding in one of the folders yesterday, I thought I'd better get the rest up here and shared with you.

Two of the pretty ugly, but quite rare Cherilea dinosaurs start this little parade of past plastic playthings, and while the Pterodactyl is reasonably complete, if rather playworn, the something ...nodon (tyranodon?) has lost a leg and the bit of the tail with the start of its name on! But, these will go with several others, some also a bit broken, in a growing sample.

 

Another handful of Blue Box Japanese, I will have some spares for swaps once they are all brought together and sorted for a final time, which is ironic, because for some time I had so few Nazar Marchenko sent me the missing figures as one of the first contributors to the Blog. Since when I've found and shown colour variations, painted examples and several mounted have either come in or been seen courtesy of Chris Smith!

 

Four Marx and a Deluxe Reading/Topper 50mm air-force/space types, very timely, as with the others in storage, they will be useful for a forthcoming comparison shot, and quite compatible with each other.

 

Another of the Taiwanese issue of the old European Asterix ice-cream/bubble-gum premiums, I opened the previous bag to shoot for a post here at Small Scale World, so I'll be leaving this one intact, as it's the less common one with shield etc . . .

 

I think these may be from Starlux, but are unmarked and probably from a boardgame, issued as premiums or possibly sold as die-cast vehicle set accessories, a' la Solido? I honestly don't know, and Starlux did have some unmarked stuff, and did issue unpainted toward the end, so?

 

Two of the figures from the MPC playset, on Planet of the Apes, the figures are in the style of Marx's made in Hong Kong WoW and Disney stuff, gloss-painted hard polystyrene, and while quite common are nevertheless nice examples of a subject which didn't get many toys outside the Mego action figure types.

This is fascinating, and anything you can add will be eagerly digested, it's a polystyrene novelty elephant, which is in two halves, apparently joined by a large ring and cavity thing which had me momentarily thinking it was a secret safe, hidden cavity type thing, before realising it's glued to its base (which also looks like the lid of something), even though there's no glue between the two halves which join tightly with no flash.

 

It could be the [sliding] lid of a vesta-case, cigarette case, or visiting/playing card case of some kind, maybe another version without the base does do service as a secret stash? Quite a good shade of 'ivorene', it's a charming, yet enigmatic little thing? 

Then, the other day, Adrian gave me a small tub of mostly die-cast vehicle accessories ad model kit figures, and these are the smaller ones with Lledo, Scalextric, Hornby and an unknown lead/whitemetal figure (O-Men?).

 

While these would appear to be the incomplete contents of both versions of the Airfix Old Bill/Omnibus kits, a Matchbox, a Dinky and a Britains Stage Coach lady passenger. I wasn't sure about the standing figure, but he's a heat-shrink which someone has painted-up anyway!

News Views etc . . . Sandown Park!

Almost forgot, and probably won’t post for a day or two, as a result, but it's the first Sandown Park toy fair of the season tomorrow, so shake-out the cobwebs and get yourself down to the UK's best show, and see if you can find a 'grail item' or a bargain!

"They're going Ape for toys over at Esher, Surrey, tomorrow!"

(MPC PotA 60mm 'styrene playset figures)

HCF is for Hairy Chewbac'grilla Fella! . . . Filthy Ape!

I spent last week getting Rack Toy Month posts scheduled on the desktop 'till the 23rd, in the hope that whatever happened with the move and stuff, I'd be able to feed things into the blog irrespective . . .

. . . , a system you now know broke down two days ago! In the meantime while I have resisted the urge to start blanket-blogging everything sitting in the garage, I did spot this classic rack toy in the 'Minor Makes F-J' box this evening (Tuesday), and had to post it! And yes . . . I've cleaned my desktop since previous capcha's!

There are - among the grandees of the hobby (whose coat-tails I hope I'm increasingly treading-on!) - those who have suggested one or two companies did all the flocking, but in fact there were many flocking flockers both in the UK and elsewhere, while others bought the - relatively small - machines and did a bit of flocking themselves.

However, after the evidence of their sourcing Wombles, Paddington and the recent heavy/cart-horse, it's clear that as far as the colonies go, HCF (of Essex) were the 'go-to' for flocking-flocker's to flog flocked flockings to!

The process is actually quite simple, although there will be variations between machine-tool makers, with a glue-sloughed product (stencilled, all-over sprayed or cut-in by hand) introduced to a sealed-cabinet full of fine-fibres and given a shake, or blow, or a spin while a static charge is applied to the atmosphere in the space. War-gamers can attest to the simplicity of the tech' (if not its execution!), having affordable hand-held equipment for flocking flat areas, or even small bases?*

Too cool for film school! Excellent rendition of an M16 (which looks as if they were intending it to be threaded with a sling at one point?) and if the Planet of the Apes' movies weren't a few years earlier, you'd swear they'd used an old Chewbacca head!

Blow-moulded polyethylene with a solid plug-in head and the techniques are the same as for the cart-horse with stencilled, airbrushed highlights to jacket and boots, and paper stickers for the leather armband/gauntlet cuffs.

*Thinking out loud . . . has anyone flocked a Leopard tank kit to represent the carpeting someone in the 1980's (Belgium, Holland  . . . or Denmark maybe?) placed on them as a camouflage? You'd have to use very fine flock with a larger-scale model as the carpeting was that thin-pile, carpet-tile, type stuff, I seem to recall?

T is for "Take your stinking paws off me you damn dirty ape!"

Except that of course the message of the early films in an ultimately arse-ripped franchise (and the truth) is that we are the damn, dirty, filth. Apes are trying to live their lives as we eat them, plough-up their lands and burn their forests...oh yeah...AND try to beat them to death when they run from the flames...

Japanese company AHI's Doctor Zaius (pronounced Zeus) on a wind-up, clicky-clacky 'running' horse, he's missing his rifle which should be slung over his shoulder.

He knew we were the 'damn dirty' apes, and twisted his science and his religion in order to preserve the status quo...a very Human trait.