Well, they're not THAT big, but pretty-much the next size-up is
Action Man/GI Joe, so they are about as big as I'm ever going to go! We're talking
Tudor Rose here, although we've
previously seen one of them marked-up as Kleeware, and I'm pretty sure I've seen the same SPG (an
M55) under
Ideal branding in the 'States?
There was a lot of Tudor Rose showing at PW's show a fortnight or so ago, and some of it got a second outing at Sandown Park the following weekend, and I did buy some, but that was all civilian and will be seen in those forthcoming show-reports, in the meantime, this truck came in a while ago now . . .
. . . and I shot this quick shot; at an odd angle, seen elsewhere I think, to show off the Blue Box box of Blue Box BB boxes, which Chris had sent in one of his lots, along with a Blue Box four-inch figure, or just under, he's actually 95mm. Well, you'd need a military escort for that load, it's almost a cupboard-full of Blue Box toys!
Then these big babies came-in, not that long ago, and while they did go through to storage at the time, I found them the other day while looking for something else, and knowing the truck was still in the flat thought
"Well, OK, we can cobble something together here I think!" As you can see they are almost as grubby as the truck, so cleaning as well as photographing was the order of the day.
The
M55 got a spray with TFR (traffic film remover) watered-down at about 50/50, and then a drying with kitchen-paper, and I took the opportunity to strip it down to its constituent parts . . . I meant to do a 'parts-shot' for all of them, but kept getting too-keen to reassemble them after I had a pile of dry parts, so forgot to do the others!
Apart from the wear to the 'fighting compartment' deck, it came up pretty mint, but I knew it would as the underside looked like it was made yesterday, so it was mostly surface dust. I also re-cut the tab of the firing 'pin' and the furred edges of its receiving slot, as they had had enough play, in the past, to round-off slightly, making it hard to fire without a two-handed faff!
All back together and it's looking like the beast it was, briefly in the 1950'60's, The shells which just sit in the rack on the engine deck were mostly missing; there was only one! And it may be missing stickers (see below), but it's a 1950's beach/garden toy survivor, so I think it's looking good!
The
25lbr, as it's described when you see it in its box (there's one on feebleBay as I write), doesn't look much like a
25lbr! And is a very different beast altogether, not least that while the SPG is 100% soft polyethylene, this is mostly hard 'kit' polystyrene, this to hold a more powerful firing mechanism with metal trigger, securely in the moulding, by having it sealed round the trigger and spring. Wheels are 'ethylene though, with steel axles. It's actually a breach-loader, with a pull-back slotted-tray to take the shell, as the trigger is cocked.
The two, together with their ammunition, there's a bagful for the
25lbr, but only the one for the
M55 . . . sniff! However, I can report - after extensive testing against the end of the bed - that both will take each other's rounds, the
25lbr's are snug in the SPG's barrel but fire efficiently, while the smaller rounds of the
M55 roll-about a bit in the breach tray of the howitzer which could affect accuracy over garden ranges!
The
Jeep completed the trio, and we're back to all-polystyrene, with the exception of two steel axles. Not the best rendition of a jeep, but not the worst either, it gets the 'look' right, but is a bit boxy or square, and lacks the rear quarter-bumpers/fenders/foot-steps, which help with the distinctive lines of a
Jeep.
Mine is missing it's spare, and like an idiot, in order to shoot one in situ, I took the back one, instead of a front one, so had to prop it up with my fingers! Yes, I could have quickly sorted it out and re-shot it, but what fun is there in such sensible conformity?
Then it was go fetch the truck, and give it the same treatment, with this I didn't remove the rear cargo-bed from the frame, as it looked like I might damage it if I forced the six clips, but the cab came off and the seats came out, while tail-gate and headlight bar both popped-off.
It's not a recognisable mark, but more of a generic . . . Bedford? And scale-wise, sits between the larger Jeep and smaller M55. It has a towing hook, but isn't as happy taking the 25lbr as the Jeep is (tighter space), so I may be looking for a smaller gun, or trailer for it?
The other obvious difference is the two-tone colouring and I think I've seen civilian versions with red, yellow or blue superstructures as 'tipper-trucks', was there a builder's/road worker's generator trailer or cement-mixer, maybe?
You can see the PVC door stickers didn't survive cleaning, one is lost forever (down the plughole I fear), the other fell off while drying, they were both time expired, the stars however (being a separate contract/print run) survived much better, and leave the question, should they all have/did they all have stickers, or were they added from other toys/models, to this truck? Stickers aren't normally a feature of Tudor Rose, nor did the Kleeware version M55 have any.
Still cleaned-up nicely. It's slightly bent, which is more of a construction thing than an age thing; as the frame gets heavier (as in a heavier moulding) under the cab, where the front wheel-arches begin, the frame has curved slightly and could do with a bit of hot water on the long spars with a press-down at the cab-end of the bed to get it all parallel with the road surface, but it's not bad enough to worry about really!
Interestingly, there seems to be a missing steering-wheel, well, that's not interesting, that's annoying, but there are two receiving holes (that's the interesting bit!), so an export version must have been sold with left-hand-drive? Across the Channel or across The Pond?
All cleaned and reassembled, if I had to scale them off the top of my head I'd say about 1:20 for the
Jeep, 1:24/25 for the truck and 1:30/32 for the
M55, it's about the same size as the
Airfix Abbot SPG.
Hopefully if I find a cheap, maybe knackered Jeep (perhaps
missing its windscreen, or chewed-up), I'll be able to take a wheel as
spare for mine, and use the steering wheel for the truck - it looks like
it would fit? Trouble is, one knackered-enough to be cheap is likely to
be missing its steering wheel too!
The marking is clear on all four items, with 'Tudor Rose' repeated on some, if you recall (or followed the link just now) the
Kleeware 'Howitzer Tank' retains the central 'Made in England' disc, but looses the other two, having a heavy
KLEEWARE raised on the underside of the deck floor/rear step, aft of the bulkhead.
Which conforms to the fact that after they had taken them over and as Tudor Rose concentrated on more trade-related matters (raw materials and machine tools), they handed production of some of their old models to their [Tudor Rose's] new Kleeware 'brand mark/division'.
Last minute checks before setting-off, a runner is sent up from the back to speak to the convoy packet-commander, who looks ready to shoot him, if he says anything too stupid!
The figures used are all about 95mm, or just short of the full four-inches, and are an earlier painted
Blue Box, a later unpainted
Blue Box, both with the same mark as the soft ethylene issue of the 25mm GI's, and the third, unmarked is almost certainly a
Rado Industries (
Ri-Toys) issue, from the same ex-
Blue Box (or ex-
Tai Sang!) mould tool.
"Gentlemen! Start. Your. Engines!"
